Quick answer: a three-station busbar machine is a 3-in-1 with punching, shearing and bending on one frame. In a Buenos Aires, Córdoba or Rosario switchboard shop it allows the stations to advance together when staffing and three independent pump groups allow. It is sized on the hardest job and confirmed at FAT, not by nominal force alone. LT models are 303U-3-C, 503U-3-C and 803U-3-C.


Why three stations on one frame
A busbar kit for an LV/MV switchboard mixes cuts, holes and bends. Moving every part from one machine to another uses floor space and creates waiting. Three stations concentrate the flow and, with independent pumps (3×4 kW on 303; 3×5.5 kW on 503 and 803), allow simultaneous work. The operator still places the flat: it is not an automatic line unless specified.

Stations and controls
The punching turret, the shear and the bending table with Siemens HMI cover routine IRAM/IEC switchboard work. The HMI offers automatic mode (length, thickness, angle) and manual stroke limits. Typical voltage in Argentine shops is 380 V / 50 Hz.


Model comparison
| Model | Nominal force (kN) | Punching diameter (mm) | Max thickness / width (mm) | Max horizontal bend (mm) | Max vertical bend (mm) | Pump power |
|---|---|---|---|---|---|---|
| 303U-3-C | 300 | Φ4.3–Φ25 | 12 / 150 | 150 / 12 | 10×100 | 3×4 kW |
| 503U-3-C | 500 | Φ4.3–Φ30 | 16 / 200 | 200 / 16 | 12×120 | 3×5.5 kW |
| 803U-3-C | 800 | Φ4.3–Φ34 | 20 / 250 | 250 / 20 | 12×120 | 3×5.5 kW |
Figures come from the public LT / LTMC tables for 303U-3-C, 503U-3-C and 803U-3-C. Thickness class must always be confirmed together with width, hole and bend geometry, and FAT samples. Published angle tolerance: ±1° / ±0.5° (verify on the offer and FAT). Usual export voltage: 380 V / 50 Hz; other voltages (400 V 60 Hz, 415 V 50 Hz, 220 V 60 Hz) are declared on the order. Argentine workshops typically run 380 V / 50 Hz.

Recommended shop flow
- Receive the drawing and select the 303, 503 or 803 class.
- Prepare cutting, punching and bending dies.
- Cut, punch and bend, measuring the first article.
- Inspect and kit the switchboard bars.


Frequently asked questions
Are three-station and 3-in-1 the same?
In this LT series, yes: they describe the same type of machine with punch, cut and bend on one frame.
Is one operator needed per station?
It is not mandatory. One operator can move through all three stations. Three people can work at once if safety and the pumps allow.
How is the model chosen for an Argentine shop?
By the largest width × thickness and the hardest hole and bend family, confirmed on the offer and at FAT.
How to request a quotation
For a quotation, send drawings, material (copper or aluminum and temper), maximum width × thickness, the hole and bend list, tolerances and supply voltage to [email protected] or WhatsApp +86 13853146766. More information: https://www.busductmachine.com/.


