• About
  • |
  • Contact
  •   English
Welcome to CNC Copper busbar machine
  English
Busbar machine sold worldwideCNC Copper Busbar Bending Punching Cutting Machine Manufacturer
Whatsapp / Tel:+8613853146766

What a busbar machine is: cutting, punching and bending in one process

time: 2026-11-10 admin: Sincerity

Quick answer: a busbar machine, or busbar processing machine, is industrial equipment that fabricates copper or aluminum busbars for switchboards, transformers and distribution. Instead of hand sawing, drilling and bending on separate presses, a three-station 3-in-1 — LT 303U-3-C, 503U-3-C or 803U-3-C — concentrates cutting, punching and bending on one frame. It is sized by the largest width × thickness and by the hardest hole or bend, not by the average bar.

Máquina LT 503U-3-C de tres estaciones: punzonado, plegado y corte en un solo bastidor.

LT 503U-3-C three-station machine: punching, bending and cutting on one frame.

Vista de fábrica de una máquina de barras de varias estaciones, con torreta de punzonado y cabezal de cizalla.

Factory view of a multi-station busbar machine with punch turret and shear head.

What is a busbar?

It is a flat conductor, almost always copper or aluminum, that distributes current inside a switchboard, cubicle or transformer. In Argentina it is also called a planchuela. The bar must respect the clearances and tests of the assembly designed to IRAM, IEC 61439 and AEA practice; the machine supplies geometry and finish.

How a busbar machine works (HowTo)

  1. Receive the drawing and material (copper or aluminum and temper).
  2. Select the 303, 503 or 803 model class.
  3. Select cutting, punching and bending dies.
  4. Cut to drawing length.
  5. Punch the hole family.
  6. Bend with the material springback table.
  7. Deburr, inspect and kit the switchboard set.

Flujo de taller: plano, modelo, matrices, corte, punzonado, plegado, inspección y kit.

Workshop flow: drawing, model, dies, cut, punch, bend, inspect and kit.

Key working units

1) Cutting / shearing

The hydraulic shear cuts the flat in a short cycle. An illustrative FAT burr criterion is under about 25 percent of thickness.

Unidad de corte (cizalla) con cabezal guiado y pisador.

Cutting (shearing) unit with guided head and hold-down.

2) Punching

The turret keeps round or oblong dies centred and speeds changeover. Public ranges: 303 Φ4.3–Φ25, 503 Φ4.3–Φ30, 803 Φ4.3–Φ34 mm. Illustrative starter families: round Ø7/9/11/13/17 and oblong Ø11×15, Ø13×18, Ø17×21.

Torreta de punzonado con matrices y pisadores.

Punching turret with dies and strippers.

3) Bending (flat vs edge)

Flat bending forms L, U or Z shapes; edge bending works in the width plane and has a tighter envelope (10×100 mm on 303; 12×120 mm on 503 and 803). Common radii: R3, R5, R10, R80 or R50. Published angle tolerance: ±1° / ±0.5°.

Unidad de plegado con mesa y panel HMI.

Bending unit with table and HMI panel.

4) Hydraulics, HMI / PLC and dies

Many U-3-C machines have three pump groups for parallel work. The usual export voltage is 380 V / 50 Hz — also typical of Argentine shops —; other voltages are declared on the order.

Muestras de cobre después del corte, el punzonado múltiple y un plegado en L.

Copper samples after cutting, multi-hole punching and an L-bend.

Muestras de cobre con plegado en Z o desfase.

Copper Z or offset bend samples.

Machine types and when to choose 3-in-1

Comparación: 3 en 1 de tres estaciones, línea dedicada y herramientas portátiles.

Comparison: three-station 3-in-1, dedicated line and portable tools.

A hydraulic or CNC/HMI-assisted 3-in-1 fits mixed-batch switchboard shops in Buenos Aires, Córdoba, Rosario or Santa Fe. A dedicated line makes sense with high volumes of a single process.

Model selection — 303U-3-C / 503U-3-C / 803U-3-C

ModelNominal force (kN)Punching diameter (mm)Max thickness / width (mm)Max horizontal bend (mm)Max vertical bend (mm)Pump power
303U-3-C300Φ4.3–Φ2512 / 150150 / 1210×1003×4 kW
503U-3-C500Φ4.3–Φ3016 / 200200 / 1612×1203×5.5 kW
803U-3-C800Φ4.3–Φ3420 / 250250 / 2012×1203×5.5 kW

Figures come from the public LT / LTMC tables for 303U-3-C, 503U-3-C and 803U-3-C. Thickness class must always be confirmed together with width, hole and bend geometry, and FAT samples. Published angle tolerance: ±1° / ±0.5° (verify on the offer and FAT). Usual export voltage: 380 V / 50 Hz; other voltages (400 V 60 Hz, 415 V 50 Hz, 220 V 60 Hz) are declared on the order. Argentine workshops typically run 380 V / 50 Hz.

Tarjeta de selección: fuerza, sección de barra y rango de punzonado.

Selection card: force, busbar section and punching range.

Vista general de una máquina de barras de clase 303U-3.

Overview of a 303U-3 class busbar machine.

Vista general de una máquina de barras LT 803U-3-C.

Overview of an LT 803U-3-C busbar machine.

What to send before buying

Material, maximum width × thickness, hole and bend list, tolerances, volume, voltage, preferred model, die package, FAT drawings and Incoterms or installation. Drawings shorten quotation and prevent undersized tonnage.

Frequently asked questions

What is a busbar machine?

It is the equipment that fabricates copper or aluminum busbars for switchboards, cubicles, transformers and distribution.

How do cutting, punching and bending work on one machine?

On a 3-in-1 they are three stations on the same frame; the operator moves the bar from one to another, or several people work in parallel when there are three pumps.

What copper thickness can a busbar machine process?

It depends on the class: about 12 mm (303), 16 mm (503) and 20 mm (803) maximum, always with width and hole or bend limits on the offer.

How to request a quotation

For a quotation, send drawings, material (copper or aluminum and temper), maximum width × thickness, the hole and bend list, tolerances and supply voltage to [email protected] or WhatsApp +86 13853146766. More information: https://www.busductmachine.com/.

Since 2005, LJ CNC has been a proud representative of the world's premier manufacturers of copper punching and cutting machines, busbar benders, and copper bus bar bending machine.

QUICK LINKS

PRODUCT CATEGORY

CONTACT US

No.9566 Jingshi Rd.Jinan City,Shandong,China
  [email protected]
 +8613853146766
WhatsApp

WhatsApp

WeChat

WeChat

Copryright  2025 CNC Copper busbar machine All rights reserved.